Wêrom kieze bouten mei heale thread fan Aya-befestigingen?
Nov 29, 2022
Bouten komme yn ferskate foarmen en soarten. Elk fan har hat syn unike en spesjale gebrûk. Wylst in protte fan harren kin wurde brûkt foar meardere soarten banen, kinne har ferskillende konstruearre struktueren om te begripen hokker type bolt de bêste kar wêze soe foar in baan wêze. INBOLT mei heal threadis in spesifyk soarte bult dat komt yn ferskate foarmen, maten, maten en produktklassen. Dizze bouten wurde brûkt foar it befestigjen fan twa of mear spare dielen tegearre.
Bouten mei de helte thread
Heal thread HEX BOLT
Hex Bolt Partiel Diskusje
Bouten mei heale thread komme yn in ferskaat oan foarmen, ynklusyf fjouwerkant, rûn, en hexagonaal. Fierder wurde se makke yn meardere soarten bouten, ynklusyf flangebolten, koetsbouten, Stifting Bolts, en HEX Bouten, om in pear te neamen. De term "heale thread" ferwiist nei de rûne búren op 'e bult, dy't helpe by it befolking of "it bult" fan' e bult ". Doe't de namme suggereart, hawwe dizze bouten allinich triedden oant de helte fan har lingte.
| Skroeven d | M1.6 | M2 | M2.5 | M3 | (M3.5) | M4 | M5 | M6 | ||
| P | Thread Pitch | 0.35 | 0.4 | 0.45 | 0.5 | 0.6 | 0.7 | 0.8 | 1 | |
| b | Ref. | L Minder as of gelyk oan 125 | 9 | 10 | 11 | 12 | 13 | 14 | 16 | 18 |
| 125＜L Minder as of gelyk oan 200 | - | - | - | - | - | - | 22 | 24 | ||
| L＞200 | - | - | - | - | - | - | - | - | ||
| c | min | 0.1 | 0.1 | 0.1 | 0.15 | 0.15 | 0.15 | 0.15 | 0.15 | |
| Maks | 0.25 | 0.25 | 0.25 | 0.4 | 0.4 | 0.4 | 0.5 | 0.5 | ||
| da | Maks | 2 | 2.6 | 3.1 | 3.6 | 4.1 | 4.7 | 5.7 | 6.8 | |
| ds | Max=NOMINAL SIZE | 1.6 | 2 | 2.5 | 3 | 3.5 | 4 | 5 | 6 | |
| min | Klasse a | 1.46 | 1.86 | 2.36 | 2.86 | 3.32 | 3.82 | 4.82 | 5.82 | |
| Klam B | - | - | - | - | - | - | - | - | ||
| dw | min | Klasse a | 2.4 | 3.2 | 4.1 | 4.6 | 5.1 | 5.9 | 6.9 | 8.9 |
| Klam B | - | - | - | - | - | - | - | - | ||
| e | min | Klasse a | 3.41 | 4.32 | 5.45 | 6.01 | 6.58 | 7.66 | 8.79 | 11.05 |
| Klam B | - | - | - | - | - | - | - | - | ||
| k | Nominaal grutte | 1.1 | 1.4 | 1.7 | 2 | 2.4 | 2.8 | 3.5 | 4 | |
| Klasse a | min | 0.98 | 1.28 | 1.58 | 1.88 | 2.28 | 2.68 | 3.35 | 3.85 | |
| Maks | 1.22 | 1.52 | 1.82 | 2.12 | 2.52 | 2.92 | 3.65 | 4.15 | ||
| Klam B | min | - | - | - | - | - | - | - | - | |
| Maks | - | - | - | - | - | - | - | - | ||
| k1 | min | 0.7 | 0.9 | 1.1 | 1.3 | 1.6 | 1.9 | 2.28 | 2.63 | |
| r | min | 0.1 | 0.1 | 0.1 | 0.1 | 0.1 | 0.2 | 0.2 | 0.25 | |
| s | Max=NOMINAL SIZE | 3.2 | 4 | 5 | 5.5 | 6 | 7 | 8 | 10 | |
| min | Klasse a | 3.02 | 3.82 | 4.82 | 5.32 | 5.82 | 6.78 | 7.78 | 9.78 | |
| Klam B | - | - | - | - | - | - | - | - | ||
| Skroeven d | (M7) | M8 | M10 | M12 | (M14) | M16 | (M18) | M20 | ||
| P | Thread Pitch | 1 | 1.25 | 1.5 | 1.75 | 2 | 2 | 2.5 | 2.5 | |
| b | Ref. | L Minder as of gelyk oan 125 | 20 | 22 | 26 | 30 | 34 | 38 | 42 | 46 |
| 125＜L Minder as of gelyk oan 200 | 26 | 28 | 32 | 36 | 40 | 44 | 48 | 52 | ||
| L＞200 | - | - | 45 | 49 | 53 | 57 | 61 | 65 | ||
| c | min | 0.15 | 0.15 | 0.15 | 0.15 | 0.15 | 0.2 | 0.2 | 0.2 | |
| Maks | 0.5 | 0.6 | 0.6 | 0.6 | 0.6 | 0.8 | 0.8 | 0.8 | ||
| da | Maks | 7.8 | 9.2 | 11.2 | 13.7 | 15.7 | 17.7 | 20.2 | 22.4 | |
| ds | Max=NOMINAL SIZE | 7 | 8 | 10 | 12 | 14 | 16 | 18 | 20 | |
| min | Klasse a | 6.78 | 7.78 | 9.78 | 11.73 | 13.73 | 15.73 | 17.73 | 19.67 | |
| Klam B | - | - | - | - | - | 15.57 | 17.57 | 19.48 | ||
| dw | min | Klasse a | 9.8 | 11.6 | 15.6 | 17.4 | 20.5 | 22.5 | 25.3 | 28.2 |
| Klam B | - | - | - | - | - | 22 | 24.8 | 27.7 | ||
| e | min | Klasse a | 12.12 | 14.38 | 18.9 | 21.1 | 24.49 | 26.75 | 30.14 | 33.53 |
| Klam B | - | - | - | - | - | 26.17 | 29.56 | 32.95 | ||
| k | Nominaal grutte | 4.8 | 5.3 | 6.4 | 7.5 | 8.8 | 10 | 11.5 | 12.5 | |
| Klasse a | min | 4.65 | 5.15 | 6.22 | 7.32 | 8.62 | 9.82 | 11.28 | 12.28 | |
| Maks | 4.95 | 5.45 | 6.58 | 7.68 | 8.98 | 10.18 | 11.72 | 12.72 | ||
| Klam B | min | - | - | - | - | - | 9.71 | 11.15 | 12.15 | |
| Maks | - | - | - | - | - | 10.29 | 11.85 | 12.85 | ||
| k1 | min | 3.19 | 3.54 | 4.28 | 5.05 | 5.96 | 6.8 | 7.8 | 8.5 | |
| r | min | 0.25 | 0.4 | 0.4 | 0.6 | 0.6 | 0.6 | 0.6 | 0.8 | |
| s | Max=NOMINAL SIZE | 11 | 13 | 17 | 19 | 22 | 24 | 27 | 30 | |
| min | Klasse a | 10.73 | 12.73 | 16.73 | 18.67 | 21.67 | 23.67 | 26.67 | 29.67 | |
| Klam B | - | - | - | - | - | 23.16 | 26.16 | 29.16 | ||
| Skroeven d | (M22) | M24 | (M27) | M30 | (M33) | M36 | (M39) | M42 | ||
| P | Thread Pitch | 2.5 | 3 | 3 | 3.5 | 3.5 | 4 | 4 | 4.5 | |
| b | Ref. | L Minder as of gelyk oan 125 | 50 | 54 | 60 | 66 | 72 | 78 | 84 | 90 |
| 125＜L Minder as of gelyk oan 200 | 56 | 60 | 66 | 72 | 78 | 84 | 90 | 96 | ||
| L＞200 | 69 | 73 | 79 | 85 | 91 | 97 | 103 | 109 | ||
| c | min | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 | 0.3 | 0.3 | |
| Maks | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 1 | 1 | ||
| da | Maks | 24.4 | 26.4 | 30.4 | 33.4 | 36.4 | 39.4 | 42.4 | 45.6 | |
| ds | Max=NOMINAL SIZE | 22 | 24 | 27 | 30 | 33 | 36 | 39 | 42 | |
| min | Klasse a | 21.67 | 23.67 | - | - | - | - | - | - | |
| Klam B | 21.48 | 23.48 | 26.48 | 29.48 | 32.38 | 35.38 | 38.38 | 41.61 | ||
| dw | min | Klasse a | 30 | 33.6 | - | - | - | - | - | - |
| Klam B | 29.5 | 33.2 | 38 | 42.7 | 46.6 | 51.1 | 55.9 | 60.6 | ||
| e | min | Klasse a | 35.72 | 39.98 | - | - | - | - | - | - |
| Klam B | 35.03 | 39.55 | 45.2 | 50.85 | 55.37 | 60.79 | 66.44 | 71.3 | ||
| k | Nominaal grutte | 14 | 15 | 17 | 18.7 | 21 | 22.5 | 25 | 26 | |
| Klasse a | min | 13.78 | 14.78 | - | - | - | - | - | - | |
| Maks | 14.22 | 15.22 | - | - | - | - | - | - | ||
| Klam B | min | 13.65 | 14.65 | 16.65 | 18.28 | 20.58 | 22.08 | 24.58 | 25.58 | |
| Maks | 14.35 | 15.35 | 17.35 | 19.12 | 21.42 | 22.92 | 25.42 | 26.42 | ||
| k1 | min | 9.6 | 10.3 | 11.7 | 12.8 | 14.4 | 15.5 | 17.2 | 17.9 | |
| r | min | 0.8 | 0.8 | 1 | 1 | 1 | 1 | 1 | 1.2 | |
| s | Max=NOMINAL SIZE | 32 | 36 | 41 | 46 | 50 | 55 | 60 | 65 | |
| min | Klasse a | 31.61 | 35.38 | - | - | - | - | - | - | |
| Klam B | 31 | 35 | 40 | 45 | 49 | 53.8 | 58.8 | 63.1 | ||
| Skroeven d | (M45) | M48 | (M52) | M56 | (M60) | M64 | (M68) | M72 | ||
| P | Thread Pitch | 4.5 | 5 | 5 | 5.5 | 5.5 | 6 | 6 | 6 | |
| b | Ref. | L Minder as of gelyk oan 125 | 96 | 102 | - | - | - | - | - | - |
| 125＜L Minder as of gelyk oan 200 | 102 | 108 | 116 | 124 | 132 | 140 | 148 | 156 | ||
| L＞200 | 115 | 121 | 129 | 137 | 145 | 153 | 161 | 169 | ||
| c | min | 0.3 | 0.3 | 0.3 | - | - | - | - | - | |
| Maks | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | ||
| da | Maks | 48.6 | 52.6 | 56.6 | 63 | 67 | 71 | 75 | 79 | |
| ds | Max=NOMINAL SIZE | 45 | 48 | 52 | 56 | 60 | 64 | 68 | 72 | |
| min | Klasse a | - | - | - | - | - | - | - | - | |
| Klam B | 44.38 | 47.38 | 51.26 | 55.26 | 59.26 | 63.26 | 67.26 | 71.26 | ||
| dw | min | Klasse a | - | - | - | - | - | - | - | - |
| Klam B | 64.7 | 69.4 | 74.2 | 78.7 | 83.4 | 88.2 | 92.9 | 97.7 | ||
| e | min | Klasse a | - | - | - | - | - | - | - | - |
| Klam B | 76.95 | 82.6 | 88.25 | 93.56 | 99.21 | 104.86 | 110.51 | 116.16 | ||
| k | Nominaal grutte | 28 | 30 | 33 | 35 | 38 | 40 | 43 | 45 | |
| Klasse a | min | - | - | - | - | - | - | - | - | |
| Maks | - | - | - | - | - | - | - | - | ||
| Klam B | min | 27.58 | 29.58 | 32.5 | 34.5 | 37.5 | 39.5 | 42.5 | 44.5 | |
| Maks | 28.42 | 30.42 | 33.5 | 35.5 | 38.5 | 40.5 | 43.5 | 45.5 | ||
| k1 | min | 19.3 | 20.9 | 22.8 | 24.2 | 26.2 | 27.6 | 29.8 | 31.2 | |
| r | min | 1.2 | 1.6 | 1.6 | 2 | 2 | 2 | 2 | 2 | |
| s | Max=NOMINAL SIZE | 70 | 75 | 80 | 85 | 90 | 95 | 100 | 105 | |
| min | Klasse a | - | - | - | - | - | - | - | - | |
| Klam B | 68.1 | 73.1 | 78.1 | 82.8 | 87.8 | 92.8 | 97.8 | 102.8 | ||
| Skroeven d | (M76) | M80 | M90 | M100 | M110 | M125 | M140 | M160 | ||
| P | Thread Pitch | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | |
| b | Ref. | L Minder as of gelyk oan 125 | - | - | - | - | - | - | - | - |
| 125＜L Minder as of gelyk oan 200 | 164 | 172 | 192 | - | - | - | - | - | ||
| L＞200 | 177 | 185 | 205 | 225 | 245 | 275 | 305 | 345 | ||
| c | min | - | - | - | - | - | - | - | - | |
| Maks | 1 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | ||
| da | Maks | 83 | 87 | 97 | 107 | 117 | 132 | 147 | 167 | |
| ds | Max=NOMINAL SIZE | 76 | 88 | 90 | 100 | 110 | 125 | 140 | 160 | |
| min | Klasse a | - | - | - | - | - | - | - | - | |
| Klam B | 75.26 | 79.26 | 89.13 | 99.13 | 109.13 | 124 | 139 | 159 | ||
| dw | min | Klasse a | - | - | - | - | - | - | - | - |
| Klam B | 102.1 | 106.9 | 121.1 | 135.4 | 144.9 | 168.6 | 185.6 | 214.1 | ||
| e | min | Klasse a | - | - | - | - | - | - | - | - |
| Klam B | 121.81 | 127.46 | 144.08 | 161.02 | 172.32 | 200.57 | 220.8 | 254.7 | ||
| k | Nominaal grutte | 48 | 50 | 57 | 63 | 69 | 79 | 88 | 100 | |
| Klasse a | min | - | - | - | - | - | - | - | - | |
| Maks | - | - | - | - | - | - | - | - | ||
| Klam B | min | 47.5 | 49.5 | 56.4 | 62.4 | 68.4 | 78.4 | 87.3 | 99.3 | |
| Maks | 48.5 | 50.5 | 57.6 | 63.6 | 69.6 | 79.6 | 88.7 | 100.7 | ||
| k1 | min | 33.2 | 34.6 | 40.3 | 43.7 | 47.9 | 54.9 | 61.1 | 69.5 | |
| r | min | 2 | 2 | 2.5 | 2.5 | 2.5 | 2.5 | 2.5 | 2.5 | |
| s | Max=NOMINAL SIZE | 110 | 115 | 130 | 145 | 155 | 180 | 200 | 230 | |
| min | Klasse a | - | - | - | - | - | - | - | - | |
| Klam B | 107.8 | 112.8 | 127.5 | 142.5 | 152.5 | 177.5 | 195.4 | 225.4 | ||
Foardielen fan bult mei heale thread
De helte - Thread Bolts leverje in oantal unike foardielen dy't oare soarten bouten faaks mislearje. Guon fan 'e liedende foardielen fan dizze soarten bouten omfetsje it folgjende:
● Halfe threadbouten binne makke fan rau materialen fan premium kwaliteit, dy't in langere libben soarget foar de bouten. Se wurde normaal makke fan hege - kwaliteit Metals lykas koalstofstiel dy't har shelf libben útwreidet.
● heale boltdraaden wurde normaal makke mei in finish coating. Dizze coating kin wêze fan ferskate soarten. BLACK OXIDE, HOT - DIPPED GALVANISJE, Plain Coating, en Sink binne de meast foarkommende soarten. Dizze coatings binne essensjeel om't se de bouten tastean om anty {}} korrosieon te ûntwikkeljen en anty {}} rust eigenskippen te ûntwikkeljen.
● Half Thread Bolts komme yn ferskate eigendomsklassen as graden en diamers, dy't it maklik makket om te besluten hokker type bult moat wurde brûkt foar hokker doel. Dyjingen dy't better moatte wurde ynformeare oer de ferskillende soarten kinne ek maklik de bêste opsje fine.
● Sjoen dat dizze bouten wurde makke fan superieur - kwaliteitsmetalen, se hawwe ek poerbêste tensile krêft. Harren tsjoenske krêft makket se yn steat om swiere loads te dragen sûnder probleem. Sa kinne dizze bouten brûkt wurde foar lytse projekten as grut as streken projekten sûnder probleem.
● Guon fabrikanten, lykas Aya, kinne de helte {{0} oanpasse - Diskusjebotten. Dit wurdt in boon as jo mei in unyk doel komme wêrfoar de beskikbere standert opsjes beskikber soe wêze geskikt.
Applikaasjes fan Bolt mei heale thread
Lykas hjirboppe neamd, heal - Thread Bolts binne heul alsidich, seagen it ferskaat berik wêryn se beskikber binne. As sadanich hawwe se in myriade fan applikaasjes. Alles kin dien wurde mei dizze bouten, út lytse DIY-projekten as snelle thúsferbetteringsprojekten nei grutte yndustriële projekten. Se wurde primêr brûkt foar it befestigjen fan twa dielen byinoar, dy't kin brûkt wurde oer yndustry. Earst moatte brûkers lykwols witte wat har doel is om it ideale soarte bult te krijen. Yndustriële fasiliteiten, de bouwsektor, de elektroanyske yndustry, de Aerospace en decense-yndustry, en in protte oaren brûke dizze bouten elke dei.
Aya Fastenersis ien fan 'e meast reputearbere liedende befestigers en leveransiers yn Sina, rjochtsje wy op gearkomste en befestigje materialen, bouten, bouten, waskjen, en noten produkten oer 20 jier.
Aya hat djip belutsen west by de befestigingsyndustens mei in single - minded en tawijd hâlding om ús klanten te leverjen {{1}, spesifike, standerdisearre, en presys befestigingsoplossingen. As jo mear ynformaasje wolle, nim dan kontakt op mei AYA-befestiging foar de details.
