Thús / Produkten / Wetterwaskers / Dichtende waskjen / Kontakt mei ús opnimme...

Produkten

Metal Sealting Washers

Standert: din7603
Commodity: Metal Sealing washers
Ek neamd: din 7603 pakkingen
Materiaal: stiel
Diameter: M2 / M2.5 / M3 / M3.5 / M4 / M5 / M6 / M7 / M8 / M14 / M14 / M18 / M24 / M24 / M30 / M24 / M24 / M24 / M30 / M24 / M30 / M6 / M24 / M24 / M24 / M6 / M24 / M24 / M24 / M24 / M24 / M24 / M24 / M24 / M24 / M24 / M24 / M24 / M24 / M24 / M24 / M24 / M6 / M64 / M82 / M80 / M12 / M1 / M1 / M1 / M1 / M100
Finish: Plain, Swart, Sink plated, hot dipend galvanisearre, oksidaasje, dacromet, fosfoet, kadmium Electrapa, nikkel plated
Moq: 1000kgs
Leadtiid: 30 oant 60 dagen

Stjoer Inquiry

Produkt Yntroduksje

AYA FASTEERS (HEBEI) Co., Ltd. is ien fan 'e meast erfarne fabrikanten en leveransiers fan metalen dichtmasjine yn Sina. Nim asjebleaft frij om metalen dichtmaskers fan hege kwaliteit te keapjen makke yn Sina hjir fan ús fabryk. Foar priisferpleatsing, kontakt mei ús opnimme.

Metal Sealing Washers-AYA

As wrâldwide leveransier fan oanpaste befestige oplossingen, is it senvice-proses ek sa ticht by klanten as de produkten fan ANY. Fan it beskriuwen moatte folgje- tsjinsten, sil Aya fuortendaliks folgje en gjin muoite sparje om klanten te helpen elke befestigjen problemen dy't ûntsteane, om de soarch oer klanten te eliminearjen.

Produkt beskriuwing

Produkt Namme	Metal Sealting Washers
Ek neamd	Din 7603 pakkingen
Materiaal	Stiel
Standert	Din7603
Diameter	Φ4×8, Φ5×7.5, Φ5.5×8, Φ6.5×9.5, Φ7×15, Φ8×11.5, Φ10×13.5, Φ12×15.5, Φ12×16, Φ12×19, Φ14×18, Φ14×20, Φ15×19, Φ15×23, Φ16×20, Φ17×21, Φ18×22, Φ20×24, Φ21×26, Φ22×27, Φ23×28, Φ24×29, Φ25×30, Φ26×31, Φ27×32, Φ28×33, Φ30×36, Φ32×38, Φ33×39, Φ35×41, Φ36×42, Φ38×44, Φ39×46, Φ40×47, Φ42×49, Φ44×51, Φ45×52, Φ48×55, Φ50×57, Φ52×60, Φ54×62, Φ55×63, Φ56×64, Φ58×66, Φ60×68, Φ64×72, Φ65×74, Φ70×79, Φ75x84, Φ78×88, Φ80×90, Φ85×95, Φ90×100
Ein	Sljochtwei, swart, sink plated, hot dipbere galvanisearre, oksidaasje, dacromet, fosfys, kadmium Electrapa, nikkel plated

Grutte			Φ4×8	Φ5×7.5	Φ5.5×8	Φ6.5×9.5	Φ7×15	Φ8×11.5	Φ10×13.5	Φ12×15.5	Φ12×16	Φ12×19
Grutte			Φ4×8	Φ5×7.5	Φ5.5×8	Φ6.5×9.5	Φ7×15	Φ8×11.5	Φ10×13.5	Φ12×15.5	Φ12×16	Φ12×19
d	min=nominaal grutte		4.2	5.2	5.7	6.7	7.2	8.2	10.2	12.2	12.2	12.2
d	Maks		4.5	5.5	6	7	7.5	8.5	10.5	12.5	12.5	12.5
dc	Max=NOMINAL SIZE		7.9	7.4	7.9	9.4	14.9	11.4	13.4	15.4	15.9	18.9
dc	min		7.7	7.2	7.7	9.2	14.7	11.2	13.2	15.2	15.7	18.7
L	Al, St, Cu, Vf, Zn	Nominaal grutte	1	1	1	1	1.5	1	1	1.5	1.5	1.5
		Maks	1.2	1.2	1.2	1.2	1.7	1.2	1.2	1.7	1.7	1.7
		min	0.8	0.8	0.8	0.8	1.3	0.8	0.8	1.3	1.3	1.3
	FA	Nominaal grutte	1	1	1	1	1	1	1	1.5	1.5	1.5
		Maks	1.2	1.2	1.2	1.2	1.2	1.2	1.2	1.65	1.65	1.65
		min	0.8	0.8	0.8	0.8	0.8	0.8	0.8	1.35	1.35	1.35
	Prg	Nominaal grutte	0.5	0.5	0.5	0.5	0.5	0.5	0.5	0.5	0.5	0.5
		Maks	0.6	0.6	0.6	0.6	0.6	0.6	0.6	0.6	0.6	0.6
		min	0.4	0.4	0.4	0.4	0.4	0.4	0.4	0.4	0.4	0.4
	Pr		0.3	0.3	0.3	0.3	0.3	0.3	0.3	0.3	0.3	0.3
per 1000 Units ed ± inn	±25%	FA	0.066	0.039	0.043	0.063	0.373	0.092	0.111	0.195	0.23	0.461
		Vf	0.036	0.022	0.024	0.035	0.228	0.051	0.062	0.107	0.126	0.282
		Prg	0.017	0.01	0.011	0.016	0.113	0.023	0.028	0.033	0.038	0.139
		Pr	0.01	0.006	0.007	0.01	0.069	0.014	0.017	0.02	0.023	0.085
		Al	0.089	0.053	0.058	0.085	0.559	0.124	0.15	0.264	0.311	0.691
		St	0.259	0.155	0.168	0.247	1625	0.362	0.435	0.767	0.905	2.01
		Cu	0.294	0.176	0.191	0.28	1.842	0.412	0.493	1.87	1.03	2.28
		Zn	-	-	-	-	1.478	-	-	-	-	1.828
Grutte			Φ14×18	Φ14×20	Φ15×19	Φ15×23	Φ16×20	Φ17×21	Φ18×22	Φ20&×24	Φ21×26	Φ22×27
Grutte			Φ14×18	Φ14×20	Φ15×19	Φ15×23	Φ16×20	Φ17×21	Φ18×22	Φ20&×24	Φ21×26	Φ22×27
d	min=nominaal grutte		14.2	14.2	15.2	15.2	16.2	17.2	18.2	20.2	21.2	22.2
d	Maks		14.5	14.5	15.5	15.5	16.5	17.5	18.5	20.5	21.5	22.5
dc	Max=NOMINAL SIZE		17.9	19.9	18.9	22.9	19.9	20.9	21.9	23.9	25.9	26.9
dc	min		17.7	19.7	18.7	22.7	19.7	20.7	21.7	23.7	25.7	26.7
L	Al, St, Cu, Vf, Zn	Nominaal grutte	1.5	1.5	1.5	1.5	1.5	1.5	1.5	1.5	1.5	1.5
		Maks	1.7	1.7	1.7	1.7	1.7	1.7	1.7	1.7	1.7	1.7
		min	1.3	1.3	1.3	1.3	1.3	1.3	1.3	1.3	1.3	1.3
	FA	Nominaal grutte	1.5	1.5	1.5	1.5	1.5	1.5	1.5	1.5	1.5	1.5
		Maks	1.65	1.65	1.65	1.65	1.65	1.65	1.65	1.65	1.65	1.65
		min	1.35	1.35	1.35	1.35	1.35	1.35	1.35	1.35	1.35	1.35
	Prg	Nominaal grutte	0.5	0.5	0.5	0.5	0.5	0.5	0.5	0.5	0.5	0.5
		Maks	0.6	0.6	0.6	0.6	0.6	0.6	0.6	0.6	0.6	0.6
		min	0.4	0.4	0.4	0.4	0.4	0.4	0.4	0.4	0.4	0.4
	Pr		0.3	0.3	0.3	0.3	0.3	0.3	0.3	0.3	0.3	0.3
per 1000 Units ed ± inn	±25%	FA	0.264	0.44	0.28	0.644	0.3	0.32	0.328	0.36	0.5	0.522
		Vf	0.145	0.242	0.154	0.394	0.165	0.176	0.18	0.198	0.275	0.288
		Prg	0.045	0.074	0.047	0.195	0.05	0.053	0.055	0.06	0.083	0.087
		Pr	0.027	0.044	0.028	0.119	0.03	0.032	0.033	0.036	0.05	0.052
		Al	0.356	0.595	0.378	0.967	0.403	0.433	0.444	0.488	0.675	0.705
		St	1.03	1.73	1.1	2.81	1.179	1.26	1.29	1.42	1.96	2.05
		Cu	1.17	1.96	1.25	3.19	1.33	1.43	1.46	1.16	2.22	2.32
		Zn	-	1.71	-	2.556	-	-	-	-	-	-
Grutte			Φ23×28	Φ24×29	Φ25×30	Φ26×31	Φ27×32	Φ28×33	Φ30×36	Φ32×38	Φ33×39	Φ35×41
Grutte			Φ23×28	Φ24×29	Φ25×30	Φ26×31	Φ27×32	Φ28×33	Φ30×36	Φ32×38	Φ33×39	Φ35×41
d	min=nominaal grutte		23.3	24.3	25.3	26.3	27.3	28.3	30.3	32.3	33.3	35.3
d	Maks		23.6	24.6	25.6	26.6	27.6	28.6	30.6	32.6	33.6	35.6
dc	Max=NOMINAL SIZE		27.9	28.9	29.9	30.9	31.9	32.9	35.9	37.9	38.9	40.9
dc	min		27.7	28.7	29.7	30.7	31.7	32.7	35.7	37.7	38.7	40.7
L	Al, St, Cu, Vf, Zn	Nominaal grutte	2	2	2	2	2	2	2	2	2	2
		Maks	2.2	2.2	2.2	2.2	2.2	2.2	2.2	2.2	2.2	2.2
		min	1.8	1.8	1.8	1.8	1.8	1.8	1.8	1.8	1.8	1.8
	FA	Nominaal grutte	2	2	2	2	2	2	2	2	2	2
		Maks	2.2	2.2	2.2	2.2	2.2	2.2	2.2	2.2	2.2	2.2
		min	1.8	1.8	1.8	1.8	1.8	1.8	1.8	1.8	1.8	1.8
	Prg	Nominaal grutte	1	1	1	1	1	1	1	1	1	1
		Maks	1.15	1.15	1.15	1.15	1.15	1.15	1.15	1.15	1.15	1.15
		min	0.85	0.85	0.85	0.85	0.85	0.85	0.85	0.85	0.85	0.85
	Pr		0.3	0.3	0.3	0.3	0.3	0.3	0.3	0.3	0.3	0.3
per 1000 Units ed ± inn	±25%	FA	0.705	0.733	0.765	0.793	0.815	0.845	1.13	1.2	1.24	1.3
		Vf	0.386	0.403	0.422	0.435	0.45	0.463	0.62	0.655	0.673	0.713
		Prg	0.177	0.184	0.19	0.197	0.204	0.212	0.28	0.298	0.305	0.323
		Pr	0.054	0.055	0.057	0.059	0.062	0.064	0.084	0.09	0.092	0.097
		Al	0.95	0.99	1.03	1.07	1.1	1.14	1.52	1.6	1.65	1.74
		St	2.77	2.88	2.99	3.1	3.21	3.31	4.41	4.66	4.8	5.07
		Cu	3.24	3.26	3.4	3.51	3.64	3.75	5	5.27	5.44	5.73
		Zn	-	-	-	-	-	-	-	-	-	-
Grutte			Φ36×42	Φ38×44	Φ39×46	Φ40×47	Φ42×49	Φ44×51	Φ45×52	Φ48×55	Φ50×57	Φ52×60
Grutte			Φ36×42	Φ38×44	Φ39×46	Φ40×47	Φ42×49	Φ44×51	Φ45×52	Φ48×55	Φ50×57	Φ52×60
d	min=nominaal grutte		36.3	38.3	39.3	40.3	42.3	44.3	45.3	48.3	50.2	52.5
d	Maks		36.6	38.6	39.6	40.6	42.6	44.6	45.6	48.6	50.5	53
dc	Max=NOMINAL SIZE		41.9	43.9	45.9	46.9	48.9	50.9	51.9	54.9	56.9	59.8
dc	min		41.7	43.7	45.7	46.7	48.7	50.7	51.7	54.7	56.7	59.5
L	Al, St, Cu, Vf, Zn	Nominaal grutte	2	2	2	2	2	2	2	2	2	2.5
		Maks	2.2	2.2	2.2	2.2	2.2	2.2	2.2	2.2	2.2	2.7
		min	1.8	1.8	1.8	1.8	1.8	1.8	1.8	1.8	1.8	2.3
	FA	Nominaal grutte	2	2	2	2	2	2	2	2	2	2
		Maks	2.2	2.2	2.2	2.2	2.2	2.2	2.2	2.2	2.2	2.2
		min	1.8	1.8	1.8	1.8	1.8	1.8	1.8	1.8	1.8	1.8
	Prg	Nominaal grutte	1	1	1	1	1	1	1	1	1	1.5
		Maks	1.15	1.15	1.15	1.15	1.15	1.15	1.15	1.15	1.15	1.7
		min	0.85	0.85	0.85	0.85	0.85	0.85	0.85	0.85	0.85	1.3
	Pr		0.3	0.3	0.3	0.3	0.3	0.3	0.3	0.3	0.3	0.3
per 1000 Units ed ± inn	±25%	FA	1.34	1.41	1.74	1.76	1.83	1.91	1.95	2.07	2.15	2.9
		Vf	0.732	0.767	0.943	0.966	1.02	1.06	1.08	1.14	1.18	1.6
		Prg	0.332	0.348	0.428	0.438	0.457	0.478	0.479	0.518	0.54	0.87
		Pr	0.1	0.104	0.128	0.132	0.138	0.144	0.144	0.156	0.162	0.174
		Al	1.79	1.88	2.32	2.37	2.47	2.58	2.64	2.8	2.9	3.85
		St	5.2	5.47	6.73	6.88	7.2	7.5	7.67	8.15	8.45	11.4
		Cu	5.88	6.15	6.96	7.8	8.15	8.5	8.68	9.23	9.56	12.9
		Zn	-	-	-	-	-	-	-	-	-	-
Grutte			Φ54×62	Φ55×63	Φ56×64	Φ58×66	Φ60×68	Φ64×72	Φ65×74	Φ70×79	Φ75×84	Φ78×88
Grutte			Φ54×62	Φ55×63	Φ56×64	Φ58×66	Φ60×68	Φ64×72	Φ65×74	Φ70×79	Φ75×84	Φ78×88
d	min=nominaal grutte		54.5	55.5	56.5	58.5	60.5	64.5	65.5	70.5	75.5	78.5
d	Maks		55	56	57	59	61	65	66	71	76	79
dc	Max=NOMINAL SIZE		61.8	62.8	63.8	65.8	67.8	71.8	73.8	78.8	83.8	87.8
dc	min		61.5	62.5	63.5	65.5	67.5	71.5	73.5	78.5	83.5	87.5
L	Al, St, Cu, Vf, Zn	Nominaal grutte	2.5	2.5	2.5	2.5	2.5	2.5	2.5	2.5	2.5	2.5
		Maks	2.7	2.7	2.7	2.7	2.7	2.7	2.7	2.7	2.7	2.7
		min	2.3	2.3	2.3	2.3	2.3	2.3	2.3	2.3	2.3	2.3
	FA	Nominaal grutte	2	2	2	2	2	2	2	2	2	2
		Maks	2.2	2.2	2.2	2.2	2.2	2.2	2.2	2.2	2.2	2.2
		min	1.8	1.8	1.8	1.8	1.8	1.8	1.8	1.8	1.8	1.8
	Prg	Nominaal grutte	1.5	1.5	1.5	1.5	1.5	1.5	1.5	1.5	1.5	1.5
		Maks	1.7	1.7	1.7	1.7	1.7	1.7	1.7	1.7	1.7	1.7
		min	1.3	1.3	1.3	1.3	1.3	1.3	1.3	1.3	1.3	1.3
	Pr		0.3	0.3	0.3	0.3	0.3	0.3	0.3	0.3	0.3	0.3
per 1000 Units ed ± inn	±25%	FA	3	3.11	3.14	3.22	3.32	3.52	3.58	4.68	5	5.86
		Vf	1.67	1.72	1.75	1.77	1.83	1.94	1.97	2.58	2.76	3.22
		Prg	0.9	0.93	0.942	0.965	1	1.05	1.07	1.4	1.5	1.76
		Pr	0.18	0.186	0.187	0.193	0.2	0.213	0.214	0.28	0.3	0.352
		Al	4.06	4.2	4.3	4.35	4.48	4.8	4.83	6.35	6.75	7.9
		St	11.8	12.2	12.3	12.6	13	13.85	14	18.4	19.6	23
		Cu	13.4	13.8	13.95	14.3	14.8	15.7	15.9	20.9	22.3	26.1
		Zn	-	-	-	-	-	-	-	-	-	-
Grutte			Φ80×90	Φ85×95	Φ90×100	-	-	-	-	-	-	-
Grutte			Φ80×90	Φ85×95	Φ90×100	-	-	-	-	-	-	-
d	min=nominaal grutte		80.7	85.7	90.7	-	-	-	-	-	-	-
d	Maks		81.2	86.2	91.2	-	-	-	-	-	-	-
dc	Max=NOMINAL SIZE		89.8	94.8	99.8	-	-	-	-	-	-	-
dc	min		89.5	94.5	99.5	-	-	-	-	-	-	-
L	Al, St, Cu, Vf, Zn	Nominaal grutte	2.5	2.5	2.5	-	-	-	-	-	-	-
		Maks	2.7	2.7	2.7	-	-	-	-	-	-	-
		min	2.3	2.3	2.3	-	-	-	-	-	-	-
	FA	Nominaal grutte	2	2	2	-	-	-	-	-	-	-
		Maks	2.2	2.2	2.2	-	-	-	-	-	-	-
		min	1.8	1.8	1.8	-	-	-	-	-	-	-
	Prg	Nominaal grutte	1.5	1.5	1.5	-	-	-	-	-	-	-
		Maks	1.7	1.7	1.7	-	-	-	-	-	-	-
		min	1.3	1.3	1.3	-	-	-	-	-	-	-
	Pr		0.3	0.3	0.3	-	-	-	-	-	-	-
per 1000 Units ed ± inn	±25%	FA	5.95	6.25	6.61	-	-	-	-	-	-	-
		Vf	3.25	3.43	3.63	-	-	-	-	-	-	-
		Prg	1.79	1.88	2	-	-	-	-	-	-	-
		Pr	0.358	0.376	0.4	-	-	-	-	-	-	-
		Al	8	8.45	8.95	-	-	-	-	-	-	-
		St	23.1	24.5	25.9	-	-	-	-	-	-	-
		Cu	26.3	27.8	29.5	-	-	-	-	-	-	-
		Zn	-	-	-	-	-	-	-	-	-	-

Produktdetails

Metal Sealing Washers-detail

Produkt foardielen

Metal Sealing Washers-advantages

Foardielen fan Din 7603 Sealing Washer

1. Metal - oan - Metal Contact biedt koppelskontrôle en in ôfmakke uterlik.

2. Metal Sealing Washers kinne brûkt wurde om it elemint te fersegeljen tsjin eksterne skea.

3. Din 7603 pakkingen binne ûntworpen foar fakuüm en hege druk vloeistoffen as gassen.

4. De din 7603-dichtwurken wurde brûkt om yn en út floeistoffen te fersegeljen, gassen, solids en stof.

5 Slaatwaskers binne te krijen foar standert skroeven en bouten.

Kwaliteit ynspeksje

Metal Sealing Washers-check

De QC-ynspekteuren wurde goed ûnderfûn yn 'e produkten kennis, lykas de fabrikaazjechniken. Spesjale ynstruminten wurde tapast om meardere testen te fieren om te soargjen dat de definitive produkten oan 'e easken fan' e merk en klanten kinne foldwaan.

Ferpakking en kontener Loading

Metal Sealing Washers-package

De ferpakking koe wurde oanpast neffens klantferlet. En it soe folslein fersterke wêze om unferwachte skea te foarkommen yn 'e ferstjoering.

Mature Warehousing en logistyksysteem, en digitale ark meitsje it guod fan guod heech effisjint.

Usage-senario's

Metal Sealing Washers-usage

Wêrom kieze Aya?

AYA advantage

AAY biedt eksklusive tsjinsten oan 1000+ leden fan oer de hiele wrâld, mei in unyk Chain Service Service-oplossing, klikje jo allinich om eksklusive oplossing te krijen en genietsje fan doar -} fan tsjinsten.